Chiligreen Home Server: Intel Rapid Storage Technology Manual do Utilizador descarregar pdf (Página 29)

RAID-Ready

7.1

A RAID-Ready system is a system configuration that allows a user to perform a RAID migration at a

later date.

For more information on RAID migrations, see the RAID Migration section of this User Guide (Section 8).

7.2 System

Requ

In order for a system to be considered RAID-Ready, it must meet all of the following requirements:

•

Contains a supported Intel chipset

•

Includes a single SATA hard drive

•

RAID must be enabled in the BIOS

•

Motherboard BIOS must include the Intel® Rapid Storage Technology option ROM

•

Intel® Rapid Storage Technology must be loaded

•

A partition that does not take up the entire capacity of the hard drive (4-5MB of free space is

sufficient)

7.3 RAID-Ready System Setup Steps

To set up a RAID-Ready system, follow these steps:

1. Enable RAID in system BIOS using the steps listed in Enabling RAID in BIOS (Section 3.2).

2. Install the Intel® Rapid Storage Technology driver using the steps listed in F6

Installation Steps (Section

5.2.3)

3. Install Intel® Rapid Storage Technology using the steps listed in Installation Steps (Section 6.3)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Sem comentários

Chiligreen Home Server: Intel Rapid Storage Technology Manual do Utilizador Página 29